How to extend the service life of slide gate plates in steel casting
You can extend the life of your slide gate plate by selecting high-quality materials, employing effective operating methods, and performing regular maintenance.
NEWS
NEWS
NEWS
How to choose ladle shroud from a China factory
When you choose ladle shroud from a China factory, there are both risks and opportunities. Some suppliers may not always provide good quality or reliable service.
NEWS
A Few Things You Should Know About the Ladle Nozzle
In steel production, ladle nozzles are critical equipment for the regulation of molten steel flow from the ladle to the tundish in the case of continuous casting
NEWS
Everything You Need to Know about Sub Entry nozzle(SEN)
A submerged entry nozzle (SEN) is an essential refractory component of the continuous steel casting process.
NEWS
The Key to Clean and Efficient Steel Casting-ladle shroud
Introduction A ladle shroud, long nozzle, shrouding pipe, or pouring tube is a highly critical refractory component in continuous steel casting. It is a hermetically closed tube between the tundish and ladle so that molten steel will pass unbroken but be shielded from atmospheric contamination. Steel quality would otherwise be severely degraded by oxidation, turbulence,
NEWS
The Unseen Champion of Continuous Steel Casting-slide gate plate
1. Introduction One of the main refractory materials in the steel continuous casting process is a slide gate plate. It mainly aims at controlling the flow of molten steel out of the ladle or tundish in a controlled manner. Although it is a small component, it is very important in the efficiency of casting, safety,
NEWS
Precise flow control in Continuous Steel Casting-tundish stopper
Tundish stopper is an essential equipment in continuous steel casting that regulates molten steel flow from the tundish to the mold. Having the capability to provide accurate and stable control, it ensures consistent casting conditions, preserves product quality, and assists in the efficiency of the whole line.
NEWS
the trial report of ladle shroud on Shanxi steel company
In June 2022, the aluminum carbon FZ slagline ladle shroud used on site has a normal service life of 4h, extreme erosion (breakage) of 5h, and steel grades Q235 and Q235B Later, the steel company wanted to use a longer-life aluminum carbon slag line long nozzle, so it experimented with slag lines GZ
NEWS
the trial report about our slide gate plates
1.Steel Plant Introduction EAF, converter and refining system: The third steelmaking plant has 4 120t converters, with a steel output of about 110t, a smelting time of about 35min, and a steel output temperature of about 1620℃. The main steel grades smelted are: Q235A, Q235B, Q345D, SS400, SPHC, HPB235, CCS-A, etc. At present, about 130
NEWS
the Iso refractory trial report Compared with Vesuvius
The steel plant produces 3.4 million tons of steel annually, but it is currently unable to produce at full capacity. The slab workshop has 4 electric furnaces, 4 refining LF furnaces, and 3 2-machine 2-stream slab continuous casting machines. 200-ton ladle and 25-ton tundish. T